Motip spray filler 400 ml

Motip spray filler 400 ml

Fill irregularities in treated and untreated surfaces of wood, metal and aluminum with MOTIP Spray Filler. Spray filler dries quickly and has excellent filling properties and coverage. The spray filler has excellent adhesion and prevents corrosion. MOTIP Spray filler is easy to sand, both wet and dry (from grit 400).

Characteristics:

1. Excellent filling properties and coverage
2. Easy to sand, both wet and dry (from grit 400)
3. Quick drying
4. Preventive against corrosion
5. Excellent adhesion

Usage instructions:

1. Before treatment: The surface must be clean, dry and free of grease. Remove loose old paint and rust, and sand the surface.

2. Treatment: The surface must be clean, dry and free of grease. The spray can should be at room temperature. Best processing temperature 10 to 25°C.

3. Shake the aerosol can for 2 minutes before use and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimeters.

4. Apply the spray filler in several thin layers. Shake the spray can again before applying the next coat. After curing, sand wet or dry (grit 400). Apply a primer before applying a finish coat.

5. After use, clean the valve (turn the aerosol can upside down and press the nozzle for about 5 seconds).

6. The drying time depends on the ambient temperature, the humidity of the air and the thickness of the applied paint.

Hazard statements (CLP):
- H222 Extremely flammable aerosol
- H229 Pressurized container: may burst if heated
- H315 Causes skin irritation
- H319 Causes serious eye irritation
- H373 May cause damage to organs through prolonged or repeated exposure
- H412 Harmful to aquatic life with long lasting effects