Xenum DPF Cleaner 400ml

Xenum DPF Cleaner 400ml

Xenum DPF Cleaner is a spray can that has been specially developed to clean the particulate filter quickly and easily. This way, soot, ash and other contamination can be removed from the particulate filter without dismantling. Thanks to this cleaning, the capacity of the DPF is restored and the lifespan of the particulate filter is extended.

Characteristics

1. Cleaning without disassembly
2. Avoid loss of power
3. No more problems caused by driving short distances
4. Longer lifespan of the particulate filter
5. Free from metal
6. Not flammable
7. Removed ash

Application

The temperature of the particulate filter must be between 20°C and 40°C when in use.

• Disassemble the temperature or pressure sensor at the outlet just before the DPF.
• Insert the hose of the aerosol can into the opening with the spray direction towards the DPF.
• Spray the contents into the filter, moving the hose in circles while spraying. Allow the product to work for at least 30 minutes.
• Reinstall the temperature or pressure sensor.
• Start the engine, dirty water (contaminated with soot and ash) will drip from the exhaust.
• Let the engine idle until the dripping stops.
• Start the regeneration by performing a test drive for approx. 20 - 30 minutes. at higher speed (100 km / h) and a rotational speed of around 3000 rpm.

If necessary, read the car's computer and clear error messages.