Steering wheel control interface
Retain the original steering wheel remote control functions,
if you trade in your factory radio for an aftermarket radio.
Compare the adapter's illustrated connector with
the one in your car to make sure you have the right one.
Also check if any of the
specified original factory radio is installed in your vehicle!
Remark:
CAN bus
Connection: ISO /Mini ISO
Connection: OEM steering wheel remote control > 3.5mm jack / loose cable
Connection: OEM sound system 2 channel / 4 channel > front/rear speaker output*
Vehicles with Blaupunkt / Matsushita / Grundig / Concert II / Symphony II / Chorus II 1-DIN OEM device with 2 rotary knobs
Vehicles with amplifier cut-off sound for additional testing:
Interference suppression filter LF mass disconnection RCA > Article: 30.5000-01
blue: +12V amplifier remote control
DIP switch settings for the retrofit device manufacturer (see BDA)
Suitable for the following vehicles:
Audi A2 (8Z) 11/1999 - 07/2005
Audi A3 (8L) 08/2000 - 06/2003
Audi A3 (8P) 07/2003 - 05-2005
Audi A4 (B6/B7) 11/2000 - 02/2009
Audi A6 (4B/C5) 05/2001 - 03/2005
Audi TT (8N) 09/1998 - 07/2006
The following signals are available:
Vehicles that are re-imported or vehicles with different software may be functionally incompatible.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reversing signal
pink: speed signal
green: ground GND handbrake signal
Output load capacity: 250 mA max.
Current requirement greater than 250 mA:
1 relay Coil resistance 75 Ohm min.
2 relays Coil resistance 150 Ohm min.
Steering wheel remote control
OEM sound system 2-channel / 4-channel
*Adjustable level
Suitable for: Universal
Audi A3 2003-2013
Audi A4 2000-2008
Audi TT 2006-2014