Steering wheel control interface
Retain the original steering wheel remote control functions,
If you have your factory radio inSteering Wheel Control Interface
Retain the original steering wheel remote control functions,
if you trade in your factory radio for an aftermarket radio.
Compare the adapter's illustrated connector with
the one in your car to make sure you have the right one.
Also check if any of the
specified original factory radio is installed in your vehicle!
Remark:
CAN bus
Connection: 32-pin Ford connector
Connection: OEM steering wheel remote control > 3.5mm jack / loose cable
Vehicles with OEM rear view camera:
Rear view camera adapter OEM camera 52pin Fiat/32pin Ford > Part: 771000-2000
yellow: Video(+)
black: Video(-)
Check the pin assignment for correctness by measuring before installation
Pin 14: Video(+)
Pin 25: Video(-)
Troubleshooting flickering camera image:
Connect video(-) pin 25 to pin 24
DIP switch settings for the retrofit device manufacturer (see BDA)
Suitable for the following vehicles:
Ford Fiesta (JHH) 06/2017 - 03/2022
Ford Fiesta (JHH) 03/2022 - 2024
Ford Transit (FAC/FAD) 06/2019 - 2024
Ford Transit Custom (FAC/FAD) 01/2018 - 2024
The following signals are provided:
Re-imported vehicles or vehicles with different software may be incompatible in their functions.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
Purple/white: +12V reversing signal
Pink: speed signal
Green: Ground GND handbrake signal
Output load capacity: 250 mA max.
Current requirement greater than 250 mA:
1 relay Coil resistance 75 Ohm min.
2 relays Coil resistance 150 Ohm min.
replacement for the 42sfo020
Suitable for: Universal
Ford Fiesta 2017-2024
Ford Transit 2019-2024
Ford Transit Custom 2018-2024