Steering wheel control interface
Retain the original steering wheel remote control functions,
if you trade in your factory radio for an aftermarket radio.
Compare the adapter's illustrated connector with
the one in your car to make sure you have the right one.
Also check if any of the
specified original factory radio is installed in your vehicle!
Remark:
CAN bus
Connection: ISO / Mini ISO Porsche plug
Connection: OEM steering wheel remote control > 3.5mm jack / loose cable
Connection: OEM MOST sound system > Cinch(m) red/white
Vehicles with CDR24 OEM device
Vehicles with PCM2.1 OEM navigation
DIP switch settings for the aftermarket device manufacturer (see BDA)
Cinch(m) > Front preamplifier output retrofit radio
Fader function not supported
Suitable for the following vehicles
Porsche Boxster (987) 10/2004 - 01/2009
Porsche Cayman (987C) 11/2005- 01/2009
Porsche 911 (997) 07/2004 - 08/2009
The following signals are provided:
Vehicles that are re-imported or vehicles with different software may be functionally incompatible.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reversing signal
pink: speed signal
green: ground GND handbrake signal
Output load capacity: 250 mA max.
Current requirement greater than 250 mA:
1 relay Coil resistance 75 Ohm min.
2 relays Coil resistance 150 Ohm min.
Steering wheel remote control
OEM Sound System MOST > Fader function not supported
Suitable for: Porsche Boxster 2004-2009
Porsche Cayman 2005-2009
Porsche 911 2004-2009