Bearing Bush, stabiliser 271040 ABS
Material: Elastomer
Outer diameter [mm]: 41
Inner diameter [mm]: 14
Paired article numbers: 271040
Guarantee: 2 years
Length [mm]: 44
Fit guarantee, show parts suitable for your vehicle.
Please your vehicle
Anti roll bar bushes
The anti-roll bar is mounted between the shock absorbers of the left and right wheel. This rod ensures that the car remains stable in a bend and does not lean too much. The stabilizer rubbers are the holders for these bars and ensure that these vibrations are absorbed. The rubbers often have a hard time and can therefore dry out or tear. Be sure to check and replace the stabilizer rubbers regularly. At Winparts you will quickly find the right anti-roll bar rubbers for your vehicle with the car model. Fill this in on the website and the correct rubbers will be displayed.
-
In stock
-
Stabiliser Mounting ADN18039 Blue Print
Material: Elastomer
Material: Rubber with textile reinforcement
Fitting Position: Front axle, left and right
Fitting Position: Front Axle
Inner diameter [mm]: 26
Guarantee: 3 years
Length [mm]: 48
Width [mm]: 28
Thickness [mm]: 48
In stock€ 3,66
-
stabilizer bearing
Material: Elastomer
Fitting Position: Front Axle
Inner diameter [mm]: 30
Guarantee: 2 years
Length [mm]: 61
Width [mm]: 53
Thickness [mm]: 35
In stock€ 8,33
-
stabilizer bearing set
Material: Elastomer
Fitting Position: Rear Axle
Inner diameter [mm]: 18,5
Supplementary Article/Info 2: With screws
Supplementary Article/Supplementary Info: With holder
Guarantee: 2 years
Thickness [mm]: 2,5
In stock€ 17,52
-
Stabiliser Mounting MEYLE-ORIGINAL Quality
Material: Elastomer
Fitting Position: Rear axle right (driver's side)
Fitting Position: Rear axle left (passenger side)
Inner diameter [mm]: 35
Required quantity: 2
Guarantee: 2 years
In stock€ 4,58
-
stabilizer bearing
Material: Elastomer
Fitting Position: Rear Axle
Fitting Position: Inner
Inner diameter [mm]: 22
Guarantee: 2 years
In stock€ 2,12
-
stabilizer bearing
Material: Elastomer
Fitting Position: Rear Axle
Inner diameter [mm]: 15
Guarantee: 2 years
In stock€ 3,54
-
Stabiliser Mounting ADT38054 Blue Print
Material: Elastomer
Fitting Position: Front axle, left and right
Fitting Position: Front Axle
Inner diameter [mm]: 27
Guarantee: 3 years
In stock€ 3,49
-
Stabiliser Mounting DE-SB-13996 Moog
Material: Elastomer
Packing Type: Box
Packaging length [cm]: 5,2
Packaging width [cm]: 5
Packaging height [cm]: 4,2
Guarantee: 2 years
Diameter [mm]: 22
Height [mm]: 51
In stock€ 2,56
-
stabilizer bearing
Material: Elastomer
Fitting Position: Rear Axle
Inner diameter [mm]: 19
Guarantee: 2 years
In stock€ 1,91
-
stabilizer bearing
Material: Elastomer
Fitting Position: Rear Axle
Outer diameter [mm]: 35
Inner diameter [mm]: 23
Guarantee: 2 years
Length [mm]: 39
In stock€ 2,31