Looking for track control arm bushing? Order here

Control arm bushings worn

When the control arm bushings are worn, this can be recognized by a number of symptoms. The first symptom is that the car will be less stable to drive. A worn control arm bushing causes play between the parts. Because of this play, the car will feel less stable and it can pull in one direction, so that you have to constantly adjust. You can also notice this play in the steering wheel, it will vibrate or steer less smoothly. Another symptom is a cracking sound when you give it full throttle or let go of the throttle. With these symptoms, inspect the track control arms for wear. A control arm bushing is not only important for the safety and stability of the car. To pass the MOT, the car must be equipped with good control arm bushings.

Replacing control arm bushings

In most cases, a control arm bushing are very difficult to replace. The rubbers are firmly pressed. Pressing new rubbers is a job that can be done with special material and often only in garages. Because this takes a lot of time, it is often more convenient and beneficial to replace the entire control arm together with the bushings and ball joint. With a little technical knowledge you can do this yourself. Would you rather leave it to the garage? Then make sure you order the parts from Winparts and deliver them yourself. This is often a lot cheaper!

Buy control arm bushings

You can easily find the right control arm bushings with your car model. You can easily enter these on our website, the suitable car parts will then be displayed. Are you looking for other auto parts for car suspension? At Winparts you will also find stabilizer rubbers, rear axle rubbers, wheel nuts and bolts and locking wheel nuts and bolts.

Control arm bushing

The control arm bushings are small but indispensable parts in the wheel suspension of the car. The track control arm of the car connects the body and the suspension. These control arms, together with the control arm bushings and the ball joint, ensure that the car remains stable during acceleration, braking and when you drive through a bend. During driving, these parts are therefore constantly loaded, which means that they will wear out over time. At Winparts you will find new control arm bushings from brands such as Febi, ABS and Blue Print. Select the car model on the website, the correct car parts will then be displayed.

9181 - 9200 / 9416 products

Filter

0 filters selected

Block view
List view

Wishbone rubber 197584 FEBI

Outer diameter [mm]: 75,2
Fitting Position: Front axle left (passenger side)
Fitting Position: Front axle right (driver's side)
Material: Steel Elastomer
Fitting Position: Lower
Fitting Position: Front
Fitting Position: Inner
Inner diameter [mm]: 12,3
Bearing Type: Hydro Bearing
Guarantee: 2 years
Thickness [mm]: 85