Steering wheel control interface
Retain the original steering wheel remote control functions,
if you trade in your factory radio for an aftermarket radio.
Compare the adapter's illustrated connector with
the one in your car to make sure you have the right one.
Also check if any of the
specified original factory radio is installed in your vehicle!
Remark:
analog steering wheel remote control
CAN bus
Connection: ISO / Mini ISO plug
Connection: OEM steering wheel remote control > 3.5mm plug / loose cable
Vehicles with CAN bus power ISO connector
Vehicles with analog steering wheel remote control RC-A/GND/RC-B Mini-ISO connector C2 Pin 10/11/12
Vehicles with Blue&Me > Silverbox module must remain installed
Vehicles with BOSE OEM sound system*
+12V amplifier remote control > Mini-ISO chamber C1 Pin 6
Vehicles without +12V ignition current terminal 15
DIP switch settings for the aftermarket device manufacturer (see BDA)
Suitable for the following vehicles:
Alfa Romeo 147 (973) 09/2007 - 04/2010
Alfa Romeo GT (937) 02/2004 - 10/2010
The following signals are provided:
Re-imported vehicles or vehicles with different software may be incompatible in terms of functions.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reversing signal
pink: speed signal
green: ground GND handbrake signal
Output load capacity: 250 mA max.
Current requirement greater than 250 mA:
1 relay Coil resistance 75 Ohm min.
2 relays Coil resistance 150 Ohm min.
Steering wheel remote control
*Adapter active system Alfa Romeo/Lancia ISO>ISO > Article: 13-1001-50
*Adapter active system various vehicles ISO>ISO > Article: 13-1190-50
Suitable for: Universal
Alfa Romeo 147 2007-2010
Alfa Romeo GT 2004-2010