Steering wheel controls
Keep the original steering wheel remote control functions when you trade in your factory radio for an aftermarket radio.
Compare the adapter plugs shown with those in your vehicle and check whether they fit optically and technically.
Also check if one of the specified original factory radios is installed in your vehicle,
Remark:
CAN bus
Connection: ISO / Mini ISO Porsche plug
Connection: OEM steering wheel remote control > 3.5mm jack / loose cable
Connection: OEM MOST sound system > Cinch(m) red/white
Vehicles with CDR24 OEM device
Vehicles with PCM2.1 OEM navigation without touchscreen
Dip switch settings for the retrofit device manufacturer (see BDA)
Cinch(m) > Front preamplifier output retrofit radio
Fader function not supported
Suitable for the following vehicles
Porsche Cayenne (9PA/955) 09/2002 - 12/2006
The following signals are provided:
Vehicles that are re-imported or vehicles with different software may be incompatible in terms of features.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reverse signal
pink: speed signal
green: ground GND handbrake signal
Output load capacity: 250 mA max.
Current requirement greater than 250 mA:
1 relay Coil resistance 75 Ohm min.
2 relays Coil resistance 150 Ohm min.
Steering wheel remote control
OEM Sound System MOST > Fader function not supported
Suitable for: Porsche Cayenne 2002-2007
application | Interface |
Guarantee | 2 years |