Steering wheel control interface
Retain the original steering wheel remote control functions,
if you trade in your factory radio for an aftermarket radio.
Compare the illustrated connector of the adapter with
that in your car to make sure you have the right one.
Also check if any of the
specified original factory radio is installed in your vehicle!
Remark:
CAN bus
Connection: 40-pin Quadlock Porsche connector
Connection: OEM steering wheel remote control > 3.5mm jack / loose cable
Connection: OEM MOST sound system > Cinch(m) red/white
Vehicles with PCM 3.0 OEM navigation with touchscreen
Dip switch settings for the retrofit device manufacturer (see BDA)
Cinch(m) > Front preamplifier output retrofit radio
Fader function not supported
Suitable for the following vehicles
Porsche Cayenne (9PA/955) 02/2007 - 02/2010
The following signals are provided:
Vehicles that are re-imported or vehicles with different software may be incompatible in terms of features.
red: +12V ignition terminal 15
orange: +12V lighting terminal 58
purple/white: +12V reverse signal
pink: speed signal
green: ground GND handbrake signal
Output load capacity: 250 mA max.
Current requirement greater than 250 mA:
1 relay Coil resistance 75 Ohm min.
2 relays Coil resistance 150 Ohm min.
Steering wheel remote control
OEM Sound System MOST > Fader function not supported
Suitable for: Porsche Cayenne 2007-2010
application | Interface |
Guarantee | 2 years |